FlexSight™ LS2000 Line-of-Sight Infrared Hydrocarbon Gas Detector

In stock
SKU
LS2000

Please contact us for price.

The FlexSight LS2000 Line-of-Sight Infrared Gas Detection System (Spec Sheet: 90-1215) is a stainless steel, IR beam-type hydrocarbon gas detection system.

The FlexSight LS2000 Line-of-Sight Infrared Gas Detection System (Spec Sheet: 90-1215) is a stainless steel, IR beam-type hydrocarbon gas detection system.

The system consists of two modules (transmitter and receiver) offering:

  • Eagle Quantum Premier model
  • Industry Leading Misalignment Tolerance: ±0.8 degrees (~±56cm @ 40m; ~±168cm @ 120m). Patented design.
  • Compliance to ISA-12.13.04 performance standard
  • Third party certified for Methane (default). Factory calibrated to Methane, Propane, and Butane
  • Performance certified to EN60079-29-4
  • New model available - extended range 100-200 meters
  • New model available - factory calibrated to ethylene.
  • -55°C to +75°C certified temperature range
  • Compliance to FM6325 and ISA-12.13.04 performance standards
  • Certified SIL 2 capable
  • Module separation distance range from 5-200 meters
  • IR source: High performance, long lasting xenon flashlamp - 10 year warranty on IR source
  • 5 year detector warranty
  • Standard 4-20 mA output (configurable), HART communications (on receiver), RS485 Modbus
  • Optional alarm relays (Ex d only)
  • Easy Install / Alignment
    • Mounting / alignment hardware included with both modules
    • Built-in locking adjusters deliver fine control of alignment angles
    • Telescope alignment tool for accurate alignment
    • No HART or Software Interrogation tool needed
  • Use of ‘Smart’ monitoring and control: maintains device temperature, heater obscuration triggers, drift / beam block tolerance, power supply and 4-20 mA monitoring, event logging, power consumption management
  • Non-intrusive zero calibration options: on-board magnetic switch, HART communication, external switch, or MODBUS communication
  • DNV Maritime approval
  • Globally certified including SIL, FM, CSA, ATEX, IECEx, CE, DNV, INMETRO, and CUTR / KIM approvals
  • Optional communication link provides: dynamic lamp power adjustments, synchronized LEDs, remote configuration read and calibration initiation from the transmitter
More Information
Color Black
produttore Det-tronics
Approvals ATEX, CE, CSA, DNV, FM, IECEx, INMETRO, SIL 2
Type of Tecnology rivelatore di gas
IP Rate IP67
Analog Protocol Det-Tronics
indirizzamento No
Intrinsically Safe No
Electrical Specifications 24V
Operating Temperature Range -55°C | +75°C
Relay Yes
Marine Approved No
SIL Approved Yes
Write Your Own Review
You're reviewing:FlexSight™ LS2000 Line-of-Sight Infrared Hydrocarbon Gas Detector
Your Rating
Icon Label Description Type Size Download
pdf FlexSight™ LS2000 Optical IR Gas Detector (A4) FlexSight™ LS2000 Optical IR Gas Detector (A4) pdf 1.1 MB Download
pdf FlexSight™ LS2000 Optical IR Gas Detector Instructions FlexSight™ LS2000 Optical IR Gas Detector Instructions pdf 1.2 MB Download
pdf FlexSight™ LS2000 Optical IR Gas Detector Specifications FlexSight™ LS2000 Optical IR Gas Detector Specifications pdf 583.9 KB Download
pdf FlexSight™ LS2000 Optical IR Gas Detector FlexSight™ LS2000 Optical IR Gas Detector pdf 1.1 MB Download
pdf FlexSight™ Optical IR Gas Detector Safety Manual FlexSight™ Optical IR Gas Detector Safety Manual pdf 487.4 KB Download
pdf Upgrade Open Path Eclipse® gas detectors to the LS2000 Upgrade Open Path Eclipse® gas detectors to the LS2000 pdf 418.7 KB Download
Copyright © 2020 - SV SISTEMI DI SICUREZZA. All rights reserved.