TSM-100K
In stock
SKU
TSM-100K
- Power supply protection (immunity and fused)
- Signal (RS485) protection (isolation and immunity)
- 2.5kV galvanic Isolation of the RS485 Ports
- ESD Protection (EN 61000-4-2): Level 4 (8kV Contact and 15 kV Air)
- EFT Protection (EN 61000-4-4): Level 4 (4kV on power port, 2kV on signal port)
- Surge Protection (EN 61000-4-5): Level unspecified (6 kV)
- Simple LED system status indication
- RS485 ports have selectable fixed terminations
- Baud rate selectable from 9600 - 115200 bits/sec
- DIN rail mounting
TSM100-K RS-485 Transient Suppression Module has been developed to protect the RS-485 communication systems against the following common electrical disturbances:
- Electrostatic Discharge (ESD) – Caused by personnel, who may have become electrostatically charged, touching the equipment or other equipment nearby.
- Electrical Fast Transient (EFT) – Bursts of fast low energy transients, produced by the switching of inductive loads, that are induced into signal and data circuits.
- Slow high energy voltage surge (Surge) – Slow high energy transients which may be induced into power and signal cables by lightning strikes in the vicinity.
TSM100-K features two galvanically isolated RS-485 ports.
Modules can be installed between communication equipment in areas that are susceptible to electrical disturbances offering an increased level of protection to the communication equipment.
| Color | Gray |
|---|---|
| produttore | Hochiki |
| IP Rate | IP21 |
| Outputs | 1 serial port RS485 |
| indirizzamento | No |
| Intrinsically Safe | No |
| Electrical Specifications | 24 Vdc |
| Operating Temperature Range | -10°C TO +50°C |
| Relay | No |
| Marine Approved | No |
| SIL Approved | No |
| Isolator | No |
Write Your Own Review
| Icon | Label | Description | Type | Size | Download |
|---|---|---|---|---|---|
|
TSM100-K-Transient-Suppression-Module-Rev | TSM100-K-Transient-Suppression-Module-Rev | 253.7 KB | Download |
Related Products
Check items to add to the cart or
